~ sudo f3probe --destructive --time-ops /dev/sde
F3 probe 9.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.
WARNING: Probing normally takes from a few seconds to 15 minutes, but
it can take longer. Please be patient.
Good news: The device `/dev/sde' is the real thing
Device geometry:
*Usable* size: 3.64 TB (7814037168 blocks)
Announced size: 3.64 TB (7814037168 blocks)
Module: 4.00 TB (2^42 Bytes)
Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
Physical block size: 512.00 Byte (2^9 Bytes)
Probe time: 5.30s
Operation: total time / count = avg time
Read: 73.8ms / 4822 = 15us
Write: 4.96s / 4192321 = 1us
Reset: 0us / 1 = 0us
~ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 931G 0 part /mnt/windox
└─sda2 8:2 0 475M 0 part
sdb 8:16 0 3.6T 0 disk
└─sdb1 8:17 0 3.6T 0 part /mnt/blue1
sdc 8:32 0 931.5G 0 disk
└─sdc1 8:33 0 919.8G 0 part /mnt/andromeda
sdd 8:48 1 114.6G 0 disk
├─sdd1 8:49 1 114.6G 0 part
└─sdd2 8:50 1 32M 0 part
sde 8:64 0 3.6T 0 disk
└─sde1 8:65 0 3.6T 0 part
zram0 253:0 0 30.5G 0 disk [SWAP]
nvme1n1 259:0 0 931.5G 0 disk
└─nvme1n1p1 259:4 0 931.5G 0 part /mnt/biochip
nvme0n1 259:1 0 1.8T 0 disk
├─nvme0n1p1 259:2 0 300M 0 part /boot/efi
└─nvme0n1p2 259:3 0 1.8T 0 part /
nvme2n1 259:5 0 3.6T 0 disk
└─nvme2n1p1 259:6 0 3.6T 0 part /mnt/oxadrive